Mobiltherm 594
传热油
产品描述
Mobiltherm 594是环烷、含氯矿物导热油用于间接换热系统。它的特点是其极低的降凝剂，高的热稳定性，在整个工作温度范围内的低粘度和良好的传热性能。
特点和优点
特别低的降凝剂允许使用加热和冷却应用，以及在冬季温度平稳启动
防止热裂化防止沉积的积累，确保油的清洁和长寿命。
在工作温度下的低粘度，提供了一个高的传热系数和低摩擦的管道，因此，能源消耗少
高初馏点利用非加压系统可能达到的最大推荐入口温度
防腐蚀
低气味
最大推荐工作温度：250°C（入口温度）。
应用
封闭或开放的传热油，根据VDI 3033和DIN 4754火或电加热循环系统的设计。
Mobiltherm 594
Heat transfer Oil
Product Description
Mobiltherm 594 is a naphthenic, chlorine-free mineral heat transfer oil for use in indirect heat transfer systems. It is characterized by its exceptionally low pour point, high level of thermal stability, a low viscosity in the entire range of operating temperature and good heat transfer performance.
Features and Benefits
-
Exceptionally low pour point allows use for both heating and cooling applications as well as smooth start up in winter temperatures
-
High resistance against thermal cracking preventing accumulation of deposits and ensuring clean and long life of the oil filling.
-
Low viscosity at operating temperature gives a high heat transfer coefficient and low friction in pipes, and therefore less energy consumption
-
High initial boiling point makes use of non pressurised systems possible up to the maximum recommended inlet temperature
-
Prevention of corrosion
-
Low odour
-
Maximum recommended operating temperature: 250°C (inlet temperature).
Applications
Heat transfer oils for closed or open, fire or electrically heated circulation systems designed according to VDI 3033 and DIN 4754.
Typical Properties
|
Mobiltherm 594
|
|
|
Viscosity, ASTM D 445
|
|
|
cSt @ 40ºC
|
4,8
|
|
cSt @ 100ºC
|
1,5
|
|
Pour Point, ºC, ASTM D 97
|
-42
|
|
Flash Point, ºC, ASTM D 92
|
135
|
|
Density @ 15 ºC kg/l, ASTM D 4052
|
850
|
|
Max. inlet temperature
|
250°C
|
|
Max. bulk temperature
|
280°C
|
 |