额外的高性能商业齿轮润滑油
产品描述
加mobilube HD 80W 85w-140 90和额外的齿轮润滑油是高性能的商业制定的基础油的选择和从一个先进的添加剂系统。这些润滑油的性能，在设计中的商业重型变速器，传动轴，和在极端的压力，最终的目标是冲击载荷。他们提供良好的化学和热稳定性，在升高的温度的散装油温度低，性能好，有良好的结果表明，锈水污染和保护，从潮湿的条件。他们建议在对埃克森美孚（ExxonMobil）应用程序API GL－5和MT - 1服务是必需的。mobilube加90和HD 80W 85w-140埃索齿轮油与普通股formulations GX 90和140 80W 85W。
特征和好处
今天的高性能的重型设备的应用程序的需求的地方在线传动系统的润滑油。高速度，高转矩负载的要求，和改进的比率，也就是比较丰满的，最大限度地提高设备寿命和formulations到优化的运营成本。额外的服务需求的时间区间对齿轮润滑油的地方。齿轮润滑油是mobilube HD +工程要满足这些挑战。关键的好处包括：
的优势和潜在的好处。
优良的热稳定性和抗高温氧化扩展到最小的齿轮和轴承寿命由于沉积和更长的密封寿命
良好的保护对低速/高扭矩和抗磨损能力的高速增加和减少的负载携带评分操作成本
良好的防锈、防腐、染色、减少磨损、寿命更长的组件
有效的润滑减少磨损和低温启动性研究
多用途能力的宽齿轮润滑油的数量减少到简化和减少库存misapplication
保持良好的薄膜电阻对润滑强度的有效成分
典型的汽车密封件和垫圈兼容的最小泄漏和减少污染
应用
推荐使用：由埃克森美孚
重型手动变速箱，传动轴，和最终要求API GL－5和MT - 1级的性能
在线-轻型和重型公路卡车，面包车和轿车，busses，
公路建设行业包括：农业、矿业、采石和
其他的重型工业和汽车应用涉及hypoid根据条件和其他齿轮在高速冲击负荷、高速低扭矩，和/或低的速度，高扭矩的条件下，万隆
初始填充，顶部封闭开关和手动传动装置中的refill（商业或是推荐的润滑油在齿轮semiautomatic传输包括驱动轴和最终的驱动器
不推荐应用程序API GL-4级的性能要求
一个用于传输的自动变速器在发动机油液或是推荐的
Mobilube HD Plus 80W-90, 85W-140
Extra High Performance Commercial Gear Lubricants
Product Description
Mobilube HD Plus 80W-90 and 85W-140 are extra high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and have demonstrated good rust protection resulting from water contamination and wet conditions. They are recommended by ExxonMobil for applications where API GL-5 and MT-1 service is required. Mobilube HD Plus 80W-90 and 85W-140 share common formulations with Esso Gear Oil GX 80W-90 and 85W-140.
Features and Benefits
Today's heavy equipment applications place higher performance demands on drive train lubricants. Higher speeds, higher torque, and heavier loads require improved formulations to maximise equipment life and optimise operating costs. Longer service intervals place additional demands on the gear lubricant. Mobilube HD Plus gear lubricants are engineered to meet these challenges. The key benefits include:
|
Features
|
Advantages and Potential Benefits
|
|
Excellent thermal stability and resistance to high temperature oxidation
|
Extended gear and bearing life due to minimal deposits and longer seal life
|
|
Good protection against low speed/high torque wear and against high speed scoring
|
Increased load carrying capability and reduced operating costs
|
|
Excellent rust, staining, and corrosion protection
|
Reduced wear and longer component life
|
|
Effective low temperature lubrication
|
Reduced wear and ease of start-up
|
|
Wide multipurpose capability
|
Reduced number of gear lubricants to simplify inventory and minimize misapplication
|
|
Good resistance to foaming
|
Maintains film strength for effective lubrication
|
|
Compatible with typical automotive seals and gaskets
|
Minimum leakage and reduced contamination
|
Applications
Recommended by ExxonMobil for use in:
-
Heavy-duty manual transmissions, axles, and final drives requiring API GL-5 and MT-1 level performance
-
On-highway light and heavy-duty trucks, busses, vans, and cars
-
Off-highway industries including: construction, mining, quarrying, and agriculture
-
Other heavy-duty industrial and automotive applications involving hypoid and other gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail
-
Initial fill, top-off, and refill of enclosed commercial gearing in manual or semiautomatic transmissions where gear lubricants are recommended including drive axles and final drives
-
Not recommended for applications requiring API GL-4 Level performance
-
Not intended for transmissions for which engine oil or automatic transmission fluids are recommended
Specifications and Approvals
|
Mobilube HD Plus Gear Oil meets or exceeds the requirements of the following industry specifications:
|
80W-90
|
85W-140
|
|
API GL-5
|
X
|
X
|
|
API MT-1
|
X
|
X
|
|
SAE J2360
|
X
|
X
|
|
SCANIA STO-1:0
|
X
|
X
|
|
Mobilube HD Plus Gear Oil has the following builder approvals:
|
80W-90
|
85W-140
|
|
Mack GO-J
|
X
|
X
|
|
Mobilube HD Plus Gear Oil is of the following quality level, but not approved:
|
80W-90
|
85W-140
|
|
MIL-PRF-2105E
|
X
|
X
|
Typical Properties
|
Mobilube HD Plus
|
|
|
|
SAE Grade
|
80W-90
|
85W-140
|
|
Viscosity, ASTM D 445
|
|
|
|
cSt @ 40ºC
|
139
|
333
|
|
cSt @ 100ºC
|
14.5
|
25.4
|
|
Viscosity Index, ASTM D 2270
|
103
|
99
|
|
Pour Point, ºC, ASTM D 97
|
-27
|
-18
|
|
Flash Point, ºC, ASTM D 92
|
210
|
230
|
|
Density @ 15ºC kg/l, ASTM D 4052
|
0.895
|
0.903
|
 |