网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> Mobilgard 5100美孚佳特™5100柴油机汽缸油 @#%¥¥¥¥¥#¥¥
Mobilgard 5100美孚佳特™5100柴油机汽缸油 @#%¥¥¥¥¥#¥¥详细说明 (浏览981次)
美孚佳特™5100
船用柴油机汽缸油
产品描述
美孚佳特™5100由埃克森美孚是高品质,高性能,船用柴油机汽缸油。Mobilgard 5100优异的性能一直在升高的峰值压力和温度下烧衬现代海洋中发现了两冲程发动机。它有一个最佳粘度超过20厘。在100ºC和较低的波动性,保证良好的润滑油膜分布和保留。通过使用独特的合成增稠剂技术和平衡配方,高粘度和低波动性达到很少或没有使用明亮的股票,可以创建存款形成由于热稳定性差。美孚佳特5100展现了优秀的活塞环和缸套下持续运行在高度腐蚀性的清洁保护引擎,减速航行条件下。
特点和优点
在较新的,更苛刻的发动机类型在慢蒸操作卓越的腐蚀保护。
良好的热稳定性和氧化稳定性可导致减少的存款和污泥的形成。清洁发动机可能会导致降低元件磨损率。
优异的抗磨性能,导致潜在的减少缸套和活塞环的磨损和优异的抗划伤的控制。
出色的去污能力,导致潜在的清洁活塞和缸套和可以帮助延长检修间隔期。
应用

海洋十字头机


Mobilgard™ 5100

Marine Diesel Engine Cylinder Oil

Product Description

Mobilgard™ 5100 by ExxonMobil is a premium quality, extra high performance, marine diesel engine cylinder oil. The outstanding performance of Mobilgard 5100 has been demonstrated at the elevated peak firing pressures and liner temperatures found in modern marine two stroke engines. It has an optimum viscosity of over 20 cSt. at 100ºC and low volatility to ensure excellent lubricant distribution and oil film retention. Through the use of unique synthetic thickener technology and a balanced formulation, the high viscosity and low volatility is attained with little or no use of bright stock which can create deposit formation due to poor thermal stability. Mobilgard 5100 has demonstrated outstanding ring and liner protection and cleanliness under sustained operation in highly corrosive engines that are under slow steaming conditions.

 

Features and Benefits

  • Excellent corrosion protection in newer, more demanding engine types during slow steaming operation.
  • Excellent thermal and oxidation stability can lead to reduced deposits and sludge formation. Cleaner engines can lead to reduced component wear rates.
  • Exceptional anti-wear properties lead to potentially reduced liner and ring wear and excellent anti-scuffing control.
  • Outstanding detergency capability leads to potentially cleaner pistons and liners and can help extend periods between overhauls.

 

Applications

  • Marine crosshead engines

 

Specifications and Approvals

Meets OEM requirements  
MAN Diesel and Turbo* X

*Please follow all OEM guidelines for engine model, feed rate and fuel sulfur use

 

Typical Properties

SAE Grade 50
Specific Gravity at 15ºC 0.953
Flash Point, ºC, ASTM D 92 244
Pour Point, ºC, ASTM D 97 -24
Viscosity, ASTM D 445  
cSt, at 40 ºC 242
cSt, at 100 ºC 21.1
Viscosity Index, ASTM D 2270 103
TBN, mg KOH/g, ASTM D 2896 100

 

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS). MSDSs are available upon request through your sales contract office, or via the Internet on http://www.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


The ExxonMobil logotype and Mobilgard are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 

8-2015 

Copyright © 2001-2016 Exxon Mobil Corporation. All rights reserved.


上一产品: Mobilgard 409 NC美孚佳特409 NC @#@%$$$#^&
下一产品: Mobilgard L540美孚佳特柴油气缸油