Mobil Hydraulic Oil M 46
Zinc-free and ashless hydraulic oil
Product Description
Mobil Hydraulic Oil M 46 is formulated with high quality solvent-refined base oils. It is free from ash-forming components, silicone and zinc. It exhibits very good anti-wear and corrosion protection properties, outstanding oxidation and thermal stability, small foaming tendency as well as good water separation characteristics. Mobil Hydraulic Oil M 46 exceeds the minimum requirements of the DIN 51524 part 2 HLP (1985).
Features and Benefits
|
Features
|
Advantages and Potential Benefits
|
|
Excellent anti-wear properties
|
Trouble-free operation
|
|
High oxidation and thermal stability
|
Long oil life
|
|
Free of zinc
|
Low impact on waste water
|
|
Free of ash-forming components
|
Low formation of residues during operation
|
|
Free of silicone
|
Trouble-free coating processes
|
|
Suitable for the lubrication of rolling and sliding bearings as well as spur gears
|
Allows product slate reductions
|
|
Low foaming tendency, even at high circulation rates
|
Trouble-free operation
|
|
Good water separation
|
Allows removal of water to reduce damages caused by corrosion
|
|
Compatibly with most seals
|
Trouble-free operation
|
Applications
Mobil Hydraulic Oil M 46 is particularly designed for application to Müller Weingarten hydraulic presses, meeting the specific requirements for this application. Mobil Hydraulic Oil M 46 is also suitable for modern hydraulic systems for which DIN 51524 part2 HLP (1985) quality level is required. It can be used also for the lubrication of bearings and spur gears in equipment such as machine tools.
Specifications and Approvals
|
Mobil Hydraulic Oil M 46 meets or exceeds the requirements of:
|
|
|
DIN 51524 Part 2 HLP (1985)
|
X
|
|
Mobil Hydraulic Oil M 46 has the following builder approval:
|
|
|
Müller-Weingarten
|
X
|
Typical Properties
|
Mobil Hydraulic Oil M 46
|
|
|
Viscosity, ASTM D 445
|
|
|
cSt @ 40ºC
|
46
|
|
cSt @ 100ºC
|
6,8
|
|
Acid Number #, mg KOH/g, ASTM D 974
|
0,4
|
|
Pour Point, ºC, ASTM D 97
|
-27
|
|
Flash Point, ºC, ASTM D 92
|
210
|
|
Density @ 15 ºC kg/l, ASTM D 4052
|
0,875
|
|
Load carrying capacity (Brugger), N/mm², E-DIN 51347, part 2
|
35
|
|
FZG, (A/8,3/90), FLS rating, DIN 51354, part 2
|
12
|
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
 |