网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> MobilLux EP 0/1/2/3/004/023美孚力士EP润滑脂
MobilLux EP 0/1/2/3/004/023美孚力士EP润滑脂详细说明 (浏览636次)
美孚力士™EP 0,1,2,3,004和023
润滑油
产品描述
美孚力士™EP 0,1,2,3,004和023的产品是一个高性能的四个通用工业润滑脂和两个特殊任务的半流体脂族。这些羟基硬脂酸锂基润滑脂的制定提供额外的保护,防止磨损,生锈和水冲洗。他们NLGI等级从00到3是可行的,基础油粘度ISO VG 150和320。
美孚力士EP 0,1,2和3润滑脂推荐用于大多数类型的工业应用,包括重型应用在高单位压力或冲击载荷的存在。这些润滑脂提供出色的防锈和防腐蚀保护和抗水冲洗出这使得它们特别适合设备在潮湿的条件下是常见的。美孚力士EP 0和1适用于集中式系统。美孚力士EP 2和3为通用润滑脂。推荐的工作温度范围是从20到130ººC C但他们可能是在较高温度下使用,如果润滑频率相应增加。
美孚力士EP 004和美孚力士EP 023特别适用于封闭式齿轮和轴承的润滑密封较差的齿轮箱也可以用在其他许多工业应用中,传统的齿轮油不能保留在齿轮箱、链条等案件,由于泄漏,由于磨损或缺少密封。推荐的工作温度范围是20到120ºC美孚力士EP 004和20至120ºC美孚力士EP 023。
特点和优点
美孚力士EP润滑脂具有悠久历史的经过验证的性能,在防腐蚀领域表现出良好的性能,低温性能和高温使用寿命。Timken OK 40磅负载了他们极大的压力和承载能力。
减少磨损或冲击载荷和振动,良好的设备的可靠性和可用性
防锈和防腐蚀保护和抗水冲洗设备的保护和良好的润滑,即使在水的存在
在潮湿的环境中延长轴承寿命的潜力,降低轴承成本和意想不到的停机时间
在集中式系统良好的可泵性(美孚力士EP 0和1)
有效的泄漏控制(美孚力士EP 004和美孚力士EP 023)
应用
美孚力士EP 0和EP 1提供良好的低温泵送性,适用于集中润滑系统和其他应用中低温性能要求。
美孚力士EP 2推荐用于滚动和滑动轴承的多用途的应用程序,在正常的操作条件下,衬套和销。
美孚力士EP 3是一个严厉的NLGI 3级润滑脂,推荐应用,最大限度的保护,防止水渗透或固体污染物是必需的。

美孚力士EP 004和美孚力士EP 023特别适用于密封较差的齿轮箱的封闭式齿轮和轴承与电机传动的最异常的地下采矿设备的润滑。美孚力士EP 004和美孚力士EP 023也可以用在其他许多工业应用中,传统的齿轮油不能保留在设备如齿轮箱,链的情况下,由于磨损或缺少密封泄漏。美孚力士EP 004通过SEW 1008小时的测试要求dr.em.203 MOD。


Mobilux™ EP 0, 1, 2, 3, 004 and 023

Grease

Product Description

Mobilux™ EP 0, 1, 2, 3, 004 and 023 products are a high performance family of four general-purpose industrial greases and two special-duty semi-fluid greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3, with base oil viscosities ISO VG 150 and 320.
Mobilux EP 0, 1, 2 and 3 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. Mobilux EP 0 and 1 are suitable for centralised systems. Mobilux EP 2 and 3 are general-purpose greases. The recommended operating temperature range is from -20ºC to 130ºC but they may be used at higher temperatures if the lubrication frequency is increased accordingly.
Mobilux EP 004 and Mobilux EP 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases they can also be used in many other industrial applications where conventional gear oils cannot be retained in gear cases, chain cases, etc. because of leakage due to worn or missing seals. The recommended operating temperature range is -20 to 120ºC for Mobilux EP 004 and -20 to 120ºC for Mobilux EP 023.

 

Features and Benefits

Mobilux EP greases have a long history of proven performance and have demonstrated good performance in the areas of corrosion protection, low temperature pumpability and high temperature service life. A Timken OK load of 40 lb illustrates their load carrying and extreme pressure capability.

  • Reduced wear under heavy or shock loading and vibration for good equipment reliability and availability
  • Protection against rust and corrosion and resistance to water washout for equipment protection and good lubrication even in presence of water
  • Extended bearing life potential in wet environments for reduced bearing costs and unanticipated downtime
  • Good pumpability in centralised systems (Mobilux EP 0 and 1)
  • Effective leakage control (Mobilux EP 004 and Mobilux EP 023)

 

Applications

  • Mobilux EP 0 and EP 1 provide good low temperature pumpability and are suitable for centralised lubrication systems and other applications where low temperature performance is required.
  • Mobilux EP 2 is recommended for multipurpose applications in antifriction and plain bearings, bushings and pins under normal operating conditions.
  • Mobilux EP 3 is a stiffer NLGI grade 3 grease recommended for applications where maximum protection against penetration of water or solid contaminants is required.
  • Mobilux EP 004 and Mobilux EP 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases on most underground mining machinery with the exception of electric motor gearings. Mobilux EP 004 and Mobilux EP 023 can also be used in many other industrial applications where conventional gear oils cannot be retained in equipment such as gear cases, chain cases, because of leakage due to worn or missing seals. Mobilux EP 004 passes the SEW 1008 hour gear test requirement DR.EM.203 mod.

 

Specifications and Approvals

Mobilux EP meets or exceeds the requirements of: Mobilux EP 0 Mobilux EP 1 Mobilux EP 2 Mobilux EP 3 Mobilux EP 004 Mobilux EP 023
DIN 51825   KP1K-20 KP2K-20 KP3K-20    
DIN 51826 GP0G-20       GP00G-20 GP000G-20

 

Mobilux EP has the following builder approvals Mobilux EP 0 Mobilux EP 1 Mobilux EP 2 Mobilux EP 3 Mobilux EP 004 Mobilux EP 023
SEW Eurodrive/ PS C Gears          X  

 

Typical Properties

  Mobilux EP 0 Mobilux EP 1 Mobilux EP 2 Mobilux EP 3 Mobilux EP 004 Mobilux EP 023
NLGI Grade 0 1 2 3 00 000
Thickener Type Lithium Lithium Lithium Lithium Lithium Lithium
Color, Visual Brown Brown Brown Brown Brown Brown
Penetration, Worked, 25ºC, ASTM D 217 370 325 280 235 415 460
Viscosity of Oil, ASTM D 445            
cSt @ 40ºC 160 160 160 160 160 320
Timken OK Load, ASTM D 2509, lb 40 40 40 40 40 40
4-Ball Wear, ASTM D 2266, Scar, mm 0.4 0.4 0.4 0.4 0.5 0.4
4-Ball Weld Load, ASTM D 2596, Kg 250 250 250 250 250 250
Dropping Point, D 2265, C 190 190 190 190    
Rust Protection, ASTM D 6138, Distilled Water 0-0 0-0 0-0 0-0 0-0 0-0

 


上一产品: KLUBER STABUTHERM GH 461,STABUTHERM GH 462
下一产品: Mobilith SHC 460/100/220/221/460/1000/1500/007美孚力富SHC系列润滑脂​