Mobil DTE 10 Excel系列抗磨液压油

产品名称           ISO粘度等级

美孚DTE 10超凡15   15

美孚DTE 10超凡15   22

美孚DTE 10超凡32   32       

美孚DTE 10超凡46   46

美孚DTE 10超凡68   68

美孚DTE 10超凡100  100

美孚DTE 10超凡150  150

美孚DTE 10超凡(Mobil DTE 10 Excel)系列是高性能抗磨液压油，旨在满足现代化、高压、工业和移

动式设备液压系统的要求。美孚DTE 10超凡的专利申请中配方采用精心选择的基础油调以专有添加剂，具

有适合各种应用的均衡性能。本产品具有出色的氧化安定性和热安定性，可延长油品寿命，并减少在严苛

条件下采用高压高输出泵的液压系统中形成沉淀物。创新型清洁性能可保护重要液压系统组件避免故障，

例如许多现代化液压系统中常见的紧公差伺服阀和比例阀。高剪切稳定性粘度指数允许宽工作温度范围，

并保持液压效率和低高温时组件保护。出色的空气释放性能为采用低停留时间的系统中提供附加的保护措

施。这有助于防止气蚀和微自燃现象。非锌抗磨系统可在齿轮泵、叶片泵和活塞泵中提供高度保护等级，

同时降低沉淀物形成。

Mobil DTE 10 Excel™ Series

Premium Quality Hydraulic Oils

Product Description

Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications.  The products exhibit outstanding oxidation and thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high pressure, high output pumps.  The innovative ultra keep clean performance protects critical hydraulic system components from malfunction, such as tight tolerance servo and proportional valves found in many modern hydraulic systems.  The shear stable, high viscosity index allows for a wide operating temperature range maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.  Outstanding air release properties provide an added measure of protection in systems with low residence time helping to prevent cavitation damage and micro dieseling.  The carefully selected base oil and additives allow passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils.  This can translate to reduced power consumption or increased machine output, resulting in monetary savings. 
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic applications.
In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids, exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system cleanliness and component protection.  Mobil DTE 10 Excel also demonstrated the value of its high viscosity index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by maintaining ISO viscosity grade.
Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against competitive products.  At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products run under identical conditions.

The energy efficiency of Mobil DTE 10 Excel relates solely to the fluid performance when compared to conventional Mobil-branded  hydraulic fluids. The technology used allows up to 6% increase in hydraulic pump efficiency compared to Mobil DTE 20 series when tested in standard hydraulic applications under controlled conditions. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with all applicable industry standards and protocols.

Features and Benefits

The Mobil DTE 10 Excel Series hydraulic oils provide outstanding hydraulic system efficiency; ultra keep clean performance, and a high degree of fluid durability. The hydraulic efficiency feature can lead to reduced energy consumption for both industrial and mobile equipment, reducing operating costs and improving productivity. Their excellent oxidation and thermal stability can help to extend oil and filter change intervals while helping to ensure clean systems. Their high level of anti-wear properties and excellent film strength characteristics result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

Applications

• Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• Systems where cold start-up and high operating temperatures are typical
• Systems requiring a high degree of load-carrying capability and anti-wear protection

• Machines employing a wide range of components using various metallurgy

Specifications and Approvals

Typical Properties