网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> Mobil Extra Hecla Super Cylinder Oil Mineral超级汽缸油
Mobil Extra Hecla Super Cylinder Oil Mineral超级汽缸油详细说明 (浏览734次)

Mobil Extra Hecla Super Cylinder Oil Mineral美孚超级汽缸油


美孚汽缸油
齿轮和汽缸油
产品描述
美孚气缸油是高性能高粘度油,专为在封闭的蜗轮工作在温和的高速度和温度,并在重负荷,低速或高温要求高粘度油。他们也打算在蒸汽发动机气缸应用。它们是由高质量的基础库存,是耐氧化和热降解,并建立了由蒸汽缸的高工作温度引起的有害存款。他们防止生锈和腐蚀,提供良好的油膜强度和优良的润滑性和抗水冲洗它们。
美孚™600W汽缸油600W™超级汽缸油,美孚和美孚™特级克力汽缸油additized增强摩擦及承载性能。产品族的四个成员被广泛应用于蜗轮蜗杆的应用,联轴器和轴承,与粘度等级取决于操作条件。在蒸汽应用美孚600W汽缸油推荐用于饱和和过热蒸汽温度达260ºC.美孚特级克力汽缸油和美孚特级克力汽缸油矿物可用于过热蒸汽260以上ºC.美孚特级克力汽缸油矿物具有良好的抗乳化性。美孚气缸油可以应用于滴灌饲料杯和力饲料机械润滑装置。


Mobil Cylinder Oils

Gear and Cylinder Oils

Product Description

Mobil Cylinder oils are high performance high viscosity oils designed for use in enclosed worm gears operating at moderate to high speeds and temperatures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also intended for use in steam engine cylinder applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion and provide good film strength and excellent lubricity and they are resistant to water washout.

Mobil 600W™ Cylinder Oil, Mobil 600W™ Super Cylinder Oil and Mobil™ Extra Hecla Super Cylinder Oil are additized to enhance their frictional and load-carrying properties. All four members of the product family are widely used in worm gear applications, couplings and bearings, with viscosity grade depending on operating conditions. In steam applications Mobil 600W Super Cylinder Oil is recommended for saturated and superheated steam up to a temperature of 260ºC. Mobil Extra Hecla Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil Mineral may be used with superheated steam above 260ºC. Mobil Extra Hecla Super Cylinder Oil Mineral has good demulsibility. Mobil Cylinder Oils can be applied both by drip feed cups and force feed mechanical lubricating devices.

 

Features and Benefits

Mobil Cylinder Oils offer the following features and potential benefits:

Features Advantages and Potential Benefits
Excellent film integrity at high temperatures Excellent equipment protection at high temperatures occasioned by variable load conditions, avoiding unexpected downtime and equipment replacement
  Provision of good sealing film round rods and in glands in steam applications
Excellent resistance to deposit formation at high temperatures Resistant to deposits on areas subject to high spot temperatures, maintaining cleaner systems, requiring less maintenance
Excellent anti-wear and low friction properties Additized grades give reduced wear
Very good water separation in absence of additives Non-additized grade gives ready separation from condensate
High quality and built in performance features Results in fewer unplanned stoppages and reduced maintenance costs

 

Applications

Mobil 600W Cylinder Oil is recommended for the following applications:

  • The splash lubrication of enclosed worm gears operating at moderate to high speeds and temperatures. (Mobil 600 W Cylinder Oil)
  • Steam cylinders, couplings, bearings, and break-in of compressor cylinders (Mobil 600 W Cylinder Oil)
  • Mobil 600W Super Cylinder Oil and Mobil Extra Hecla Super Cylinder Oil are recommended for the above applications but under higher temperature and load conditions
  • Mobil Extra Hecla Super Cylinder Mineral is recommended where ready separation from condensate is essential, for example, where exhaust steam is used for process work
  • Mobil Extra Hecla Super Cylinder Mineral may also be used as a tempering oil for bath temperatures up to 290ºC

 

Typical Properties

Mobil Cylinder Oils Mobil 600 W Cylinder Oil Mobil 600 W Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil Mineral
ISO Viscosity Grade -- 460 680 1000
Viscosity, ASTM D 445        
cSt @ 40ºC 375 460 680 1000
cSt @ 100ºC 28.0 30.5 35.8 42.0
Viscosity Index, ASTM D 2270 95 95 85 80
Pour Point, ºC, ASTM D 97 -9 -6 0 3
Flash Point, ºC, ASTM D 92 282 282 282 288
Density,ASTM D4052 @15.6ºC kg/l, 0.90 0.91 0.92 0.92
Copper Strip Corrosion, ASTM D 130,3 hrs @ 100º C 1B 1B 1B 1B

 


上一产品: Mobilgard 409 NC美孚佳特409 NC @#@%$$$#^&
下一产品: Mobil Extra Hecla Super Cylinder Oil美孚汽缸油