美孚DTE800系列（汽轮机油、透平油）

Mobil DTE 832,846

美孚DTE™800系列

卓越的性能涡轮机油

产品描述

美孚DTE™832和846是性能优越的透平油设计用于在蒸汽涡轮机，燃气涡轮机和联合循环燃气涡轮机（CCGT）的最苛刻的操作条件下的应用中使用。 这些进步的产品是基于高品质加氢基础油为一起特别选择的添加剂设计提供了严重的责任燃气轮机以及所需的沉积物控制和“保持清洁”性能卓越的热/氧化稳定性所需的汽轮机优良的水分离性操作。 该制剂还包括一个无锌抗磨系统，以满足承载齿轮涡轮机的需求。

除了满足现代蒸汽和燃气涡轮机设计的独立要求，美孚DTE 800系列是为需要的燃气涡轮机和蒸汽涡轮机串联运行一个单一的石油联合循环应用的绝佳选择。 可以同时满足积炭控制和分水性能要求，正是这种先进的润滑油技术的关键性能亮点。 美孚DTE 832和846的优异的热/氧化性，确保它们能够在最严苛的透平机环境中运行。

美孚DTE 800系列油品的性能特点转化为优良的设备保护，运行可靠，具有减少停机时间，延长换油。 这些产品还提供了最大的灵活性，以运营商，因为他们可以在所有类型的涡轮中使用：蒸汽，气体和齿轮传动涡轮机。

特点和优点

美孚DTE品牌矿物油基产品一直为世界各地的运营商水轮机的选择超过一百年。 在此期间本公司的科学家们一直与风机设备制造商和运营商的牢固的关系，以确保新的涡轮机设计的需求得到满足或超过我们的润滑剂。 这需要美孚涡轮机油的不断升级换代，最适合现代的基础油和添加剂技术的应用。

对于在高功率输出工作现代化的固定式燃气涡轮机，出色的防热/氧化降解和沉积物控制是关键要求。 严重的操作引起的热应力，可能导致过滤器堵塞，伺服阀存款或短油生活的润滑剂。 对于现代的蒸汽涡轮机，需要耐氧化性的高水准以及良好的水分离性的蒸汽泄漏案件。 联合循环操作中，它是必要的润滑剂，以满足涡轮机类型的需要。

DTE 800系列油品具有以下特性与潜在效益：

优点及潜在效益

1 避免误用润滑油和昂贵变化出

2 降低库存成本

3 减少停机时间，运行更可靠

4 换油周期延长，降低产品成本

5 为适应的涡轮（气体和蒸汽），降低维护和更换成本提供出色的保护

6 延长设备保护，减少更换成本

7 高效的系统运行，减少维护

应用

美孚DTE 832和846是性能优越的透平油专为蒸汽和燃气透平油系统，直接或齿轮耦合和涡轮转速控制机制的使用。 具体应用包括：

联合循环（CCGT）发电的应用，包括那些具有用于蒸汽涡轮机和燃气涡轮机的共同循环系统。

用于发电的蒸汽轮机或燃气轮机装置的润滑，天然气长输管道，工艺操作和热电厂。

产品特点      

1 达到或超过两个燃气涡轮机和关键建设者汽轮机的要求   

2 优良的热/氧化稳定性      

Mobil DTE™ 800 Series

Superior Performance Turbine Oils

Product Description

Mobil DTE™ 832 and 846 are superior performance turbine oils designed for use in steam turbines, gas turbines and combined cycle gas turbine (CCGT) applications under the most severe operating conditions. These progressive products are based on high quality hydrotreated basestocks for exceptional thermal/oxidation resistance along with specially chosen additives engineered to provide the deposit control and "keep-clean" performance required by severe duty gas turbines as well as excellent water separability needed for steam turbine operation. The formulations also include a non-zinc antiwear system to meet the load carrying requirements of geared turbines.
In addition to meeting the separate requirements of modern steam and gas turbine designs, Mobil DTE 800 Series are excellent choices for combined cycle applications that require a single oil for a gas turbine and a steam turbine run in tandem. Simultaneously meeting both deposit control and water separation requirements is the key performance highlight of this advanced lubricant technology. The excellent thermal/oxidative resistance of Mobil DTE 832 and 846 ensures that they can be operated in the most severe turbine environments.
The performance features of Mobil DTE 800 Series oils translate into excellent equipment protection, reliable operation, with reduced down-time and extended oil charge life. These products also provide the ultimate flexibility to the operator because they can be used in all turbine types: steam, gas and geared-turbines.

Features and Benefits

Mobil DTE brand mineral-based products have been the choice for turbine operators worldwide for more than one hundred years. During that period our company's scientists have maintained the strongest ties with turbine equipment builders and operators to ensure that the needs of new turbine designs are met or exceeded by our lubricants. This has required a continual upgrading of Mobil turbine oils and the application of the most appropriate modern base oil and additive technology.
For modern stationary gas turbines that operate at high power outputs, exceptional protection against thermal/oxidative degradation and deposit control are key requirements. Severe operation causes thermal stressing of the lubricant that can result in filter plugging, servo valve deposits or short oil life. For modern steam turbines, a high level of oxidation resistance is required as well as good water separability in cases of steam leaks. For combined cycle operation, it is necessary for the lubricant to meet the needs of both turbine types.
DTE 800 Series oils offer the following features and potential benefits:

Applications

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include:

• Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine.
• Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Specifications and Approvals

Typical Properties