美孚特嘉开式齿轮油

Mobiltac 375NC

Mobiltac 325NC

产品描述

Mobiltac 375 NC是一个额外的高性能非铅， 稀释剂型，重酒体开式齿轮润滑剂设计 为各种各样的开式齿轮的应用程序。 陆战队 容器使用此产品上开式齿轮驱动绞盘， 绞车和绞盘一定。 它包含一个不含氯， 挥发性溶剂的使用过程中，确保流动性， 即使在低温下。 一旦应用，所述稀释剂 蒸发和润滑剂呈现出柔性，粘合剂， 这是保持整个高强度的一致性 使用寿命。

Mobiltac 375数控强烈坚持齿轮 牙齿和其他机械元件，以抵制过度 扔断，从而提供一种耐磨，粘性， 该润滑以及在边界连续膜 条件。

Mobiltac 375数控不会变硬，芯片，或片状在寒冷 天气，是自我修复，并不会形成硬包装 堆积在齿轮齿根。 滴水和投掷过的 最小，并且将润滑剂容易清理用 溶剂浸泡过的抹布。 润滑剂提供抗 雨，雪，水和工艺水冲洗。 其闪点 最大限度地减少火灾的危险。 这种新一代齿轮润滑剂 很容易通过手工或自动售货机应用。 Mobiltac数控技术已迅速成为一个坚定的 世界各地的许多开式齿轮用户中的最爱。

特点和优点

Mobiltac 375 NC是最新的技术进展 为Mobiltac品牌的已使用过的产品 在开式齿轮巨大的成功几十年。 这些新技术产品显著提供 在改善环境和性能优势 较旧的稀释剂型技术。 它具有以下特性与潜在效益：

产品特点

1 优点及潜在效益

2 齿轮齿和其他机器出色的保护

3 优异的低温泵送性以水洗优异的耐

4 最少掷起飞和滴水

5 无碎裂或剥落在低温下

6 易清理破烂衣服和常规溶剂或清洁液

优点:

1 少设备磨损和故障，降低更换，

2 边界润滑条件下的元素 停机时间和维护成本

3 预热启动容易在低环境，并避免成本

4 保持精湛的保护在潮湿的环境;少 意外停工

5 减废产品和新产品的成本

6 在低温下保持保护润滑膜

7 提高安全性并降低维护成本

Mobiltac 375 NC, 325 NC and 275 NC

Gear Oils

Product Description

Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a non-chlorinated, volatile solvent that ensures fluidity during application, even at low temperatures. Once applied, the diluent evaporates and the lubricants take on a flexible, adhesive, high-strength consistency that is maintained throughout their service life. Mobiltac 375 NC, 325 NC and 275NC adhere strongly to gear teeth and other machine elements to resist excessive throw-off, thereby providing a wear-resistant, viscous, continuous film that lubricates well under boundary conditions. Mobiltac 275 NC also contains solid phase EP/anti-wear additive for added equipment protection
Mobiltac 375 NC, 325 NC and Mobiltac 275NC will not harden, chip, or flake in cold weather, are self-healing, and do not form a hard-packed buildup in gear-tooth roots. Dripping and throw-off are minimal, and the lubricants are easily cleaned up with a solvent-soaked rag. The lubricants provide resistance to rain, snow, and process water washing. Their flash points minimise the risk of fire. These new generation gear and mining lubricants are applied easily by hand or by automatic dispensers. Mobiltac NC technology has rapidly become a firm favourite among many open gear users and mine operators around the world

Features and Benefits

The Mobiltac NC Series of products are the most recent technology advance for the Mobiltac brand of products that have been used with great success in open gear and other mining applications for several decades. These new technology products provide significantly improved environmental and performance benefits over older diluent-type technologies. They offer the following features and potential benefits:

Applications

Mobiltac 375 NC, 325 NC and Mobiltac 275NC are designed for use in a wide variety of open gear and mining applications:

• Mobiltac 375 NC, containing a high-viscosity base oil, is recommended for the lubrication of highly loaded open gears, including those that operate at high temperature, for example, ring gears on cement kilns and large gears on ore-processing mills
• Mobiltac 325 NC is recommended for the same applications as Mobiltac 375 NC. It contains more diluent and has a lower viscosity for ease of application at cooler temperatures
• Mobiltac 275 NC is designed for service as a lubricant for mine and quarry shovels, draglines, and related equipment; also open gears, racks and pinions, swing gears, booms and sticks
• Minimum operating temperature for Mobiltac 325 NC is -18 C, 375 NC is -1 C and 275 NC is -9 C

Typical Properties