|
|
| 产品展示 >> Castrol Tribol 1066/68，Castrol Tribol1066/68 |
|
Castrol Tribol 1066/68，Castrol Tribol1066/68详细说明 （浏览1015次）
Castrol Tribol 1066
Slideway oils
Description
Castrol TribolTM 1066 is a high performance slide and way lubricant. Tribol 1066 was developed specifically to lubricate
the slides and ways of modern metalworking machine tools used in high precision, high volume manufacturing.
Demands for increased production have led to the design of higher and higher speed machines. Increased operating
speeds have also spawned new metal removal fluids and coolants which are highly surface active to increase the speed
of tool wetting and the removal of heat.
Surfactant additives used in modern coolants have a detergent and cleansing action on oil and can rapidly displace
lubricants used to protect slides and ways.
Tribol 1066 is manufactured with the highest quality base oils and additives available. The base oils are highly refined
paraffinic base stocks with high Viscosity Index (VI). They were selected for their ability to sustain a lubricating film
despite sudden changes in load or shearing forces. The formulation includes select polymer additives for both adhesive
and cohesive characteristics.
A carefully balanced treat rate of rust and oxidation inhibitors offers maximum rust protection for parts and long service life
from the oil. Tribol 1066 is not corrosive to ferrous or non-ferrous metals.
Application
Tribol 1066 was developed primarily to lubricate modern machine tools. The special formulation of Tribol 1066 resists the
cleansing action of surface-active coolants so that wear on the slides and ways is minimised and motion is smooth and
accurate. Interaction between the metalworking fluid and slideway lubricant can result in lower metalworking fluid
performance and reduced fluid life. Tribol 1066 was specifically developed to be non-emulsifying with water, synthetic and
semi-synthetic metal removal fluids. It rapidly pops out of these fluids as free tramp oil without removal of the fluid’s
additives. This is achieved without the use of demulsifiers or surfactants that can affect the stability of the coolants. This
permits servicing of the metal removal fluids using conventional skimming techniques.
With Tribol 1066, positive lubrication can be achieved to control wear and promote machining accuracy without excessive
re-application or high lubricant consumption.
Advantages
· Tribol 1066 effectively controls "stick-slip," resulting in higher quality output, fewer rejects and reduced operating
costs.
· Tribol 1066 is compatible with both metal and plastic materials used on modern machining equipment.
· This product has outstanding demulsification properties with quality aqueous metalworking fluids which prolongs
coolant life for additional cost savings.Castrol Tribol 1066
18/04/2006, Global Version Number 1
Castrol, Tribol and the Castrol logo are trademarks of Castrol Limited, used under licence.
All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date
of printing. However, such information may, nevertheless, be affected by changes in the blend formulation occurring
subsequent to the date of printing. Material Safety Data Sheets are available for all Castrol Ltd products. The MSDS must
be consulted for appropriate information regarding storage, safe handling and disposal of a product.
Castrol (UK) Ltd, Industrial Lubricants & Services
Wakefield House, Aspect Park, Pipers Way, Swindon, Wiltshire SN3 1RE, UK
Tel.: +44 (0)845 964 51 11, Fax: +44 (0)1793 486 083
castrol.com/industrial
Typical Characteristics
Test Method Units 1066/68 1066/220
ISO viscosity grade - - 68 220
Density @ 15°C ISO 12185 / ASTM
D4052
g/ml 0.88 0.87
Viscosity @ 40°C ISO 3104 / ASTM
D445
mm2
/s 68 233
Viscosity @ 100°C ISO 3104 / ASTM
D445
mm2
/s 8.97 20.9
Viscosity Index ISO 2909 / ASTM
2270
- 106 106
Pour point ISO 3016 / ASTM D97 °C/°F -12/10 -9/15
Flash point, COC ISO 2592 / ASTM D92 °C/°F 232/450 249/480
Rust test
Procedure A (Distilled Water)
Procedure B (Synthetic sea water)
ISO 7210 / ASTM
D665B
-
Pass
Pass
Pass
Pass
Copper corrosion (3 hrs @ 100°C) ISO 2160 / ASTM
D130
- 1b 1b
Timken OK load ASTM D2782 / IP 240 kg/lbs 29/65 29/65
Four Ball Wear Test (40 kg,
75°C/167°F, 1800 rpm, 1 hr), scar
diameter
ASTM D2266 mm 0.4 0.4
Four Ball Extreme Pressure Test
Weld Load
ASTM D2783
kg 200 200
Falex Wear Test, wear teeth ASTM D2670 5 5
Falex Extreme Pressure Test ASTM D3233-B lbs 1750 1750
Stick-slip ratio (Cincinnati Lamb) - 0.70 0.70
Cincinnati Lamb specification P-47 P-50
Subject to usual manufacturing tolerances.
 |
|
|