|
|
| 产品展示 >> TOTAL MULTIS EP 3/TOTAL MULTIS EP3 |
|
TOTAL MULTIS EP 3/TOTAL MULTIS EP3详细说明 （浏览915次）
MULTIS EP 3
Grease
Multi purpose extreme pressure lithium/calcium grease.
APPLICATIONS
Multi purpose EP grease
General Lubrication
Recommendation
l MULTIS EP 3 is a true multi purpose grease, formulated for lubrication of loaded slide-
,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock
loaded or vibrating applications in transport, agriculture and off road equipment, operating
in wet, dusty and/or dry conditions.
l Suitable as general purpose grease for industrial applications requiring a NLGI 3 grade
extreme Pressure grease.
l Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use
a pneumatic pump system or cartridges.
SPECIFICATIONS
l ISO 6743-9: L-XBCEB 3
l DIN 51 502: KP3K -20
ADVANTAGES
Durable film
Miscible
Mechanical stability
Thermal stability
No harmful substances
l Because of its true Multi Purpose character MULTIS EP 3 may replace a wide range of
greases, allowing stock rationalization and simplification of maintenance.
l Forms a durable lubrication film, resulting in reduction of maintenance and down-time
costs.
l Miscible with most other conventional soap greases.
l Excellent mechanical stability avoiding ejection or loss of consistency during operation.
l Excellent adhesion to metal.
l Good thermal stability, leading to high resistance to temperature variations.
l MULTIS EP 3 does not contain lead, or other heavy metals considered harmful to human
health and the environment.
TYPICAL CHARACTERISTICS METHODS UNITS MULTIS EP 3
Soap/thickener -
Lithium/
Calcium
NLGI grade ASTM D 217/DIN 51 818 - 3
Color Visual - Pale brown
Appearance Visual - Smooth
Operating temperature range °C -20 to 120
Penetration at 25°C ASTM D 217/DIN51 818 0.1 mm 220-250
Four ball weld load DIN 51 350-4 daN 260-280
Anti-rust performance SKF- EMCOR DIN 51 802/IP220/NFT 60-135/ISO 11007 rating 0-0
Dropping point IP 396/DIN ISO 2176 °C >190
Kinematic viscosity of the base oil at 40°C ASTM D 445/DIN 51 562-1/ISO 3104/IP71 mm²/s (cSt) 150
Above characteristics are mean values given as an information
 |
|
|