网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> Castrol Syntilo S合成切削液
Castrol Syntilo S合成切削液详细说明 (浏览853次)

Castrol Syntilo S
Synthetic coolant
官方网站:

Descriptihttp://castrol.com.ua/catalog/Syntilo%20S.pdfon
Castrol Syntilo™ S is a synthetic coolant which has been developed for use as a general purpose grinding fluid for
ferrous metals. It forms a clear, stable solution in both hard and soft waters. Syntilo S exhibits good anti-corrosion
properties coupled with a high resistance to bacterial attack and low residue behavior.
Application
Syntilo S is developed for surface, cylindrical, double disk and centreless grinding.
Advantages
• Low foaming in all water conditions to ensure continuous grinding performance
• Inhibits microbial growth to extend fluid life in central systems and individual sumps
• Rejects tramp oil to the surface of the fluid for easy removal
• Chlorine, phenol and nitrite free for environmental compliance
• Excellent corrosion protection even in hard water
• Settles chips quickly to prevent grinding wheel build-up and maintain a clean working environment
• Neutral odor
• Low residue tendency even at long sump life
Typical Physical Characteristics
Recommended Concentrations
Grinding: 3-4%
Water range: 0–400 ppm CaCO3
Page 1 / 2 19 July 2010, Version 1
Castrol, Syntilo Other, and the Castrol logo are trademarks of Castrol Limited, used under licence
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or
representation, express or implied, is made as to its accuracy or completeness. Data provided is based on standard tests under
laboratory conditions and is given as a guide only. Users are advised to ensure that they refer to the latest version of this data
sheet.
It is the responsibility of the user to evaluate and use products safely, to assess suitability for the intended application and to
comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by
either BP plc or its subsidiaries for any damage or injury resulting from abnormal use of the material, from any failure to adhere
to recommendations, or from hazards inherent in the nature of the material. All products, services and information supplied are
provided under our standard conditions of sale. You should consult our local representative if you require any further


上一产品: CASTROL Syntilo 9930C/嘉实多Syntilo9930C
下一产品: CASTROL SYNTILO XPS合成水溶性切削液