网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> CASTROL SYNTILO XPS合成水溶性切削液
CASTROL SYNTILO XPS合成水溶性切削液详细说明 (浏览865次)

SYNTILO XPS
合成水溶性切削液

官方网站:http://castrol.com/liveassets/bp_internet/castrol/castrol_advantage/STAGING/local_assets/downloads/s/syntilo_xps_cn_tds.pdf
嘉实多Syntilo XPS是一种符合福特规格的高性能、长寿命的全合成金属加工液。
产品应用
嘉实多Syntilo XPS通过提高加工速度和进给速度而使生产效率最大化,尤其是难
加工不锈合金和耐热合金。
嘉实多Syntilo XPS在重负荷加工操作中性能卓越,在有些应用中,它可以代替纯
油,却无损于表面抛光效果和刀具寿命。
嘉实多Syntilo XPS对操作人员无害,气味温和,不刺激皮肤,不会使皮肤脱脂。
嘉实多Syntilo XPS不含氯、苯酚和亚硝酸盐。
产品特征
S 合成性能添加剂、
极性润滑剂、合成
防锈剂和特殊泡沫
的独特组合;
S 抗细菌和真菌感染
的卓越性能;
S 卓越的可湿性。
产品优点
S 拥有卓越润滑和冷却性能的无油合成产品,在软
水中也抗起泡、抗矿物油、可有效撇除分离杂油。
提高加工速度和进给速度、不损害表面抛光效果、
不用增加切削工具冷却剂的消耗;
S 槽液使用寿命极长。由于无需额外的生物杀灭剂,
液体维护的需求也减少。由于废水产生量变少,
可以充分使用机床、处理成本也相应减少;
S 双重好处:一方面提高冷却性能,另一方面减少
由于带出槽液引发的冷却剂损失。Syntilo XPS每
周调整率比传统水溶性油低一半。除了减少冷却
剂消耗,Syntilo XPS还减少了加工之后的部件清
洗需要、改善了操作工人的工作环境。
产品数据
SYNTILO XPS
典型物理特征
浓缩液
-
外观
20ºC的相对密度
折射计修正系数
溶液
外观
5%浓缩液PH值
推荐使用的浓度
5%~10%(视应用而定)。
附加说明
清晰黄色液体
1.08
1.4
-
清澈液体
8.7
要想获得最长使用寿命,在使用嘉实多Syntilo XPS之前,需要用嘉实多Flexiclean处
理,清洗和消毒冷却液系统。
处理需在冷却剂弃用前一天添加大约1%的嘉实多Flexiclean到冷却剂的剂量中。有关
详细信息,请查询嘉实多Flexiclean产品数据表。
本资料已尽可能确保截至印刷之日所包含信息的准确性。但是,配方的变化可能会
影响其中的某些内容。嘉实多提供所有产品的材料安全数据表(MSDS)。贮存、

Castrol Syntilo S
Synthetic coolant
Description
Castrol Syntilo™ S is a synthetic coolant which has been developed for use as a general purpose grinding fluid for
ferrous metals. It forms a clear, stable solution in both hard and soft waters. Syntilo S exhibits good anti-corrosion
properties coupled with a high resistance to bacterial attack and low residue behavior.
Application
Syntilo S is developed for surface, cylindrical, double disk and centreless grinding.
Advantages
• Low foaming in all water conditions to ensure continuous grinding performance
• Inhibits microbial growth to extend fluid life in central systems and individual sumps
• Rejects tramp oil to the surface of the fluid for easy removal
• Chlorine, phenol and nitrite free for environmental compliance
• Excellent corrosion protection even in hard water
• Settles chips quickly to prevent grinding wheel build-up and maintain a clean working environment
• Neutral odor
• Low residue tendency even at long sump life
Typical Physical Characteristics
Recommended Concentrations
Grinding: 3-4%
Water range: 0–400 ppm CaCO3
Page 1 / 2 19 July 2010, Version 1
Castrol, Syntilo Other, and the Castrol logo are trademarks of Castrol Limited, used under licence
This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or
representation, express or implied, is made as to its accuracy or completeness. Data provided is based on standard tests under
laboratory conditions and is given as a guide only. Users are advised to ensure that they refer to the latest version of this data
sheet.
It is the responsibility of the user to evaluate and use products safely, to assess suitability for the intended application and to
comply with all applicable laws and regulations. Material Safety Data Sheets are available for all our products and should be
consulted for appropriate information regarding storage, safe handling, and disposal of the product. No responsibility is taken by
either BP plc or its subsidiaries for any damage or injury resulting from abnormal use of the material, from any failure to adhere
to recommendations, or from hazards inherent in the nature of the material. All products, services and information supplied are
provided under our standard conditions of sale. You should consult our local representative if you require any further


上一产品: CASTROL Syntilo 9930C/嘉实多Syntilo9930C
下一产品: Castrol Syntilo K1合成切削液