网站首页 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯
工业润滑油专区

 
产品展示 >> Mobil Delvac Xtreme Grease
Mobil Delvac Xtreme Grease详细说明 (浏览1021次)

Mobil Delvac Xtreme Grease

Grease

Product Description

Mobil Delvac Xtreme Grease is an extra high performance extreme-pressure grease. It is an NLGI 2 grade and is manufactured with a proprietary, high-temperature lithium complex thickener system. It exhibits excellent resistance to softening under sever working and provides good adhesion and cohesion. An extreme-pressure additive provides exceptional protection against wear and shock loads, while additional additives enhance resistance to high-temperature oxidation and protection against rust. Other formulation features provide very good resistance to water wash, and long service in bearings operating at high temperatures. This heavy-duty, severe-service grease has outstanding structural stability and chemical stability, will not corrode steel or copper bearing alloys, and is compatible with conventional seal materials.

Mobil Delvac Xtreme Grease is recommended for use in heavy-duty trucks, especially hinge and bucket pins, U-joints, and fifth wheels. It is also recommended for construction and mining sector applications, particularly for the lubrication of plain and antifriction bearings in contractor and mining vehicles working under severe operating and weather conditions. Mobil Delvac Xtreme Grease is also recommended for use in heavily loaded industrial bearings. The recommended application temperature range is -20°C to +175°C.

 

Features and Benefits

Mobil Delvac Xtreme Grease is designed by our formulation technologists specifically to meet the needs of customers with heavily loaded equipment that requires high extreme-pressure/antiwear performance and stay-in-place performance even in tough conditions where water wash, high sliding, and high temperature conditions are present.

Features Advantages and Potential Benefits
Excellent resistance to water, including spray off and wash out Maintains excellent lubrication properties and protects equipment in conditions of water contamination
Outstanding extreme-pressure and antiwear protection Lower maintenance costs and less unanticipated downtime
Better stay-put properties at high temperatures Excellent performance in high shear, high load applications, especially where grease re-supply is limited
Excellent resistance to rust and corrosion Protects equipment in the presence of water for reduced maintenance and longer equipment life

 

Applications

      Recommended by ExxonMobil for use in:

  • Heavy-duty trucks, especially hinge and bucket pins, U-joints, and fifth wheels
  • Mining and construction equipment
  • Highly loaded plain and antifriction industrial bearings

Typical Properties

Mobil Delvac Xtreme Grease  
NLGI Grade 2
Thickener Type Lithium Complex
Color, visual Orange
Penetration, Worked @ 25°C, mm/10, ASTM D217 280
Dropping Point, °C, ASTM D2265 260
Viscosity of Oil, cSt @ 40°C, ASTM D445 320
Penetration Consistency Change, mm/10, ASTM D1831 -4
Timken OK Load, lb, ASTM D2509 40 (min)
4-Ball Wear Test, mm, ASTM D2266 0.5
Corrosion Prevention, ASTM D1743 Pass
Copper Strip Corrosion, ASTM D4048 1A
Water Washout, 1h @ 79°C, % ASTM D1264 6

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed.  MSDS's are available upon request through your sales contract office, or via the Internet.  This product should not be used for purposes other than its intended use.  If disposing of used product, take care to protect the environment.


The Mobil logotype, the Pegasus design, and Delvac are trademarks of Exxon Mobil Corporation, or one of its subsidiaries. 

4-2013 

Copyright © 2001-2013 Exxon Mobil Corporation. All rights reserved.


上一产品: KLUBER STABUTHERM GH 461,STABUTHERM GH 462
下一产品: Mobilgrease XHP 681 Mine